Make sure that the most current firmware is loaded on the receiver. The current versions are available at https://topconpositioning.com/support.
- Do a power cycle on the receiver (set the power to Off and On):
- Push the Power button.
- Hold the Power button for 3 to 10 seconds.
- Clear the NVRAM and restore the default settings.ADDITIONAL INFORMATION:This restores the receiver’s parameters to the factory default settings and erases the almanac and ephemeris files. This procedure does not delete data files from the receiver memory.
Previous:
Troubleshooting
Next:
Power Problems
myTopcon NOW! support
Take your Topcon experience to the next level with myTopcon NOW! This platform is a self-service tool for your desktop or mobile device.
