It is necessary to install the correct firmware and software versions before you start the machine installation. Only update firmware and software if it is necessary.
Make sure that you update the firmware and software in the specified sequence in the table below.
Note: Visit Topcon Firmware & Software Updates to download new versions of the firmware and software and view the release notes. Sign-in or sign-up is necessary.
| Sequence | Device | Software/firmware version |
|---|---|---|
| 1 | 3D-MC - See the 3D-MC User Guide | 15.5.1.100 or newer |
| 2 | MC-X1 controller - See Upgrade MC-X controller firmware | 2.7.11 |
| 3 | GR-i3 receiver - See Upgrade GR-i3 firmware | 2.86 or newer |
| 4 | GNSS - See Upgrade GNSS firmware | 5.5 or newer |
| 5 | TS-i4 IMU sensor - See the applicable operation guide | 2.0.15 or newer |
| 6 | GX-10W or CT8X2 - See the applicable operation guide | CT8X2 (v10), GX-10W |
| 7 | UR-1 radio - See Load UR-1 firmware | 2.0.9 (bootloader) or newer 1.8.2 (UR-1 firmware) or newer 2.2p4 (R2C) or newer |
| 8 | LSB-series firmware - See the applicable operation guide | LSB110WCAN_Ver103 or newer |
