MC-Mobile is an app-based machine control system developed specially for skid steer loaders and compact track loaders (CTL). It supplies Indicate 2D/3D but with 2D/3D Automatic Control for specified attachment types.
MC-Mobile uses the new MC-X architecture hardware and 3D-MC v15 software. The app runs on the GX-10W and CT8X2 ruggedized tablets.
Note: Refer to the applicable CTL attachment installation guides for the specified system configuration. All system configurations start with the base 2D Body installation. See the Related topic.
The MC-Mobile hardware and software installation has the same flow and requirements across all CTL models. The different configurations use these components:
- MC-X1 controller
- A7R prism
- RS-1 rotation sensor
- RP-i3 prism
- TS-i4 IMU sensor
- GR-i3 and Z-Stack vibration mount
- Sonic Tracker 2+
- Wireless display
- LS-B200W sensor
Next:
MC-X license
myTopcon NOW! support
Take your Topcon experience to the next level with myTopcon NOW! This platform is a self-service tool for your desktop or mobile device.
