An MC-X License is necessary for the MC-X controller and MC-Max Dozer Systems features to function correctly. The license is based on the system configuration and is installed through the MC-X Machine Control Gateway.MC-X Licenses can be purchased via BizHub. The MC-X License file (*.lic) must be downloaded and activated from myTopcon NOW! prior to installation via the MC-X Machine Control Gateway.
MC-X License features are system-specific for MC-Max Dozer and include:
| Positioning Inputs | Supports |
|---|---|
| 2D Slope | Laser and sonic slope |
| 2D Elevation | Laser and sonic elevation |
| 3D Primary | Pimary (main) 3D positioning sensor (required for Single GNSS, LPS, and/or mmGPS) |
| 3D Secondary | Secondary (aux) 3D positioning sensor (required for Mastless GNSS) |
| GNSS | |
| GNSS | GNSS positioning |
| mmGPS | mmGPS (requires GNSS) |
| High Speed | 20 Hz GNSS |
| Fixed Sensor | GR-i3F sensors |
| Removable Sensor | GR-i3 sensors |
| LPS | |
| Total Station | Limited range LPS positioning (≤130m) (Any OAF enabled total station) |
| Total Station Range + | Unlimited range LPS positioning (any OAF enabled total station) |
| Automatic Control | |
| Slope | Automatic slope control |
| Elevation | Automatic elevation control |
| Display | |
| Wired | MC-Max (GX Displays) |
| Other | |
| MC-X | Required for all licenses |
Previous:
Introduction
Next:
System configurations
myTopcon NOW! support
Take your Topcon experience to the next level with myTopcon NOW! This platform is a self-service tool for your desktop or mobile device.
