Looking for your apps? Click the account icon in the upper right corner of the page.

Non-CAN configuration

Topcon recommends that you install the reverse signal wire on masted non-CAN machine setups for the best user experience.
Dealers must configure the machine builder for the specified valve setup if a non-CAN machine is selected.
  1. Select a Valve Type.
  2. Check or uncheck Reverse Signal is Wired.
    ADDITIONAL INFORMATION:
    Refer to System diagrams.
Related information
Machine measurements3D-MC Dozer Setup. This lets you enter the recorded measurements in the cab during the MC-Max Dozer setup processes. Put the total station approximately one machine length away from the machine, aligned adjacent to the front, right corner of the dozer blade to see the prism during the necessary machine measurements.
2D masted dozerLPS masted dozerGNSS masted dozerDual GNSS mastless dozer

myTopcon NOW! support

Take your Topcon experience to the next level with myTopcon NOW! This platform is a self-service tool for your desktop or mobile device. 

Product manuals
paper icon
Communications
phone icon
E-learning
hat icon
Quick start guides
support icon
Firmware & software updates
cloud icon
Troubleshooting
webinars icon
Visit myTopcon NOW!