Assign the AUX GR-i3 receiver on OneWire

All GR-i3 receivers are configured and shipped from the factory as Main. You must configure one of the GR-i3 receivers as Aux.

Disconnect the MAIN GR-i3 receiver from the bottom of the MAIN GR-i3 vibration mount on the left side of the machine.
Open MCWEB.
Select EquipmentCANOpen.
ADDITIONAL INFORMATION:
Figure: CANOpen
Select the main drop-down list, then select aux.
ADDITIONAL INFORMATION:
Figure: CANOpen aux
Select Save.
Reconnect the Main GR-i3 receiver.