Configure the receiver with an internal cellular modem. Select the data type, correction protocol, elevation mask angle, antenna height, and RTK input format.
- Select the receiver with the internal cellular modem.
- Set the type of data to use for the job configuration:
- VRS
- Single base
- Topcon relay
- Select the protocol of the input correction data:
- NTRIP 2.0/1.0
- NTRIP 1.0
- TCP/IP
- Set the elevation mask angle.
- Set the antenna height.
- Select the RTK input message format:
- IP address and TCP port number of the remote server
- Password and user ID to login to the selected server.
Previous:
Integrated radio modem rover setup
myTopcon NOW! support
Take your Topcon experience to the next level with myTopcon NOW! This platform is a self-service tool for your desktop or mobile device.
