Looking for your apps? Click the account icon in the upper right corner of the page.

Radio modules

Item
Specification
SATEL TR4+
SATEL-TR4+ is a UHF transceiver.
Specified frequency bands are limited to specified regions and possibly not be available in all areas. Speak with a local Topcon dealer to learn what is locally available.
  • Operation frequency: 403 MHz to 473 MHz (licensed)*
    • Channel spacing: 12.5 kHz to 25 kHz
    • Carrier output power: User-selectable (10 mW to 1 W)
    • Sensitivity: -115 dBm BER 10E-2
  • Supported protocols and modulations:
Protocol:
RTCM SC135
SATEL-3AS
SATEL
SATEL
PDL
PDL
TrimTalk (P)
TrimTalk (T)
PacCrest FST
SOUTH
Modulation:
4FSK
4FSK
8FSK
16FSK
4FSK
GMSK
GMSK
GMSK
4FSK
*Regional UHF frequencies can be licensed or unlicensed, but are subject to restrictions in the 403 MHz to 473 MHz range. Failure to understand and apply this procedure can cause non-operation of the modem or breach of local regulations.
SATEL TR9
SATEL TR9 is a frequency hopping spread spectrum transceiver. It uses license-free 902 MHz to 928 MHz bandwidth. The radio module is approved and ready to use in Canada, USA, Australia, and New Zealand. Speak with a local Topcon dealer to learn what is locally available.
  • Operation frequency: 902 MHz to 928 MHz (license-free)**
    • Frequency hopping: User-selectable (10 channels)
    • Carrier output power: User-selectable (250 mW to 1 W)
    • Sensitivity: -108 dBm BER 10E-2
  • Supported protocols and modulations:
Protocol:
Topcon FH915
Topcon FH915+
Modulation:
2FSK
2FSK
** Use of the 900 MHz frequency band can be limited in some areas by regional regulations.
ALINCO XE9030EP (Japan only)
XE9030EP is a wireless modem that satisfies both electrical and mechanical specifications necessary for the Technical Regulations Conformity Certification of Japan.
  • Operation frequency: 351.200000 MHz to 351.38125 MHz
    • Channel spacing: 6.25 kHz
    • Carrier output power: User-selectable (500 mW to 1 W)*
    • Modulation: π/4Shift QPSK, 4FSK
    • Sensitivity: ≤ 08 dBuV (BER 1x10-2)
Modulation:
π/4Shift QPSK
4FSK (512)
4FSK (1024)
bytes per second:
1024
4096
4096
Transmit power:
100 mW to 500 mW
100 mW to 1W
100 mW to 1W
*Carrier output power of the Alinco XE9030EP is limited to a maximum of 500 mW for π/4Shift QPSK.
Previous: Electrical

myTopcon NOW! support

Take your Topcon experience to the next level with myTopcon NOW! This platform is a self-service tool for your desktop or mobile device. 

Product manuals
paper icon
Communications
phone icon
E-learning
hat icon
Quick start guides
support icon
Firmware & software updates
cloud icon
Troubleshooting
webinars icon